Stihl MS 201 T C-MZ

Features

• STIHL M-TRONIC™: This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• BUILT-IN RETRACTABLE CARRY RING: The built-in carry handle makes it convenient and easy to maneuver in and out of trees.
• TOP HANDLE: The top-handle model is specially designed for in-tree professional use only!
• ADJUSTABLE AUTOMATIC OILER: The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• MASTER CONTROL LEVER™: The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• INTELLICARB™ COMPENSATING CARBURETOR: The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• SIDE-ACCESS CHAIN TENSIONER: The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• TOOLLESS FUEL AND OIL CAPS WITH RETAINERS: Simply lift the lever and twist the caps to remove or tighten. There‘s no need to use a tool to tighten or loosen.
• STIHL QUICKSTOP®: STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• EMATIC™ LUBRICATION SYSTEM: The Ematic™ guide bar when used with STIHL OILOMATIC® saw chain will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL OILOMATIC® SAW CHAIN: STIHL makes its own saw chain.
• EMATIC™ BAR: Includes a polymer ramp reservoir which holds bar oil until it can be picked up by passing chain. This can reduce oil usage by up to 50%.
• BUMPER SPIKES: Help prevent pull-in and provide better control, making cutting easier.
• SPARK ARRESTER MUFFLER: Has large baffles which reduce noise level and contain a screen designed to reduce the emission of sparks.
• STIHL QUICKSTOP® CHAIN BRAKE SYSTEM: Designed to stop the chain in fractions of a second. Can be manually activated or activated by inertia if the kickback force is sufficient.
• FRONT HAND GUARD: Designed to reduce the risk of injury.
• FRONT HANDLE: Designed for a secure grip and ergonomically angled for comfort.
• PROTECTED SPARK PLUG: Protected, yet easy to change.
• LARGE STARTING HANDLE: Easy to grip.
• SMOOTH CLEAN DESIGN: No rough edges to snag on clothing or brush.
• AIR FILTER COVER: Easy to remove for fast and easy filter cleaning or replacement.
• MASTER CONTROL LEVER™: A single lever operating the choke, starting throttle lock and on-off switch.
• REAR HAND GUARD: Reduces the risk of injury as well as provides a wide area for foot placement during starting.
• HIGH-TECH POLYMER HOUSINGS: Lightweight, withstand greater impact and are corrosion-resistant.
• TRANSLUCENT FUEL TANK: Allows operator to easily check fuel level before starting work.
• ANTI-VIBRATION SYSTEM: Helps reduce operator fatigue.
• ELECTRONIC IGNITION: Provides easier starting and smoother running.
• REPLACEABLE "IN TANK" FUEL AND OIL FILTERS: Lower cost and are easy to maintain.
• INBOARD CHAIN BRAKE: Requires less maintenance and makes saw chain sprocket easier to remove.
• AUTOMATIC BAR AND CHAIN OILER: Lets operator concentrate on cutting, not on bar lubrication.
• CHAIN CATCHER: Helps reduce the risk of operator contact by a chain if it should break or derail.
• THROTTLE TRIGGER LOCKOUT: Must be depressed before the trigger can be activated.
• *NOTE: STIHL chainsaws have many common features. However, all models may not have all features shown here. Consult your Dealer for details.

Other Features

• INTELLICARB™ COMPENSATING CARBURETOR: Measures air on clean side of air filter and adjusts metering diaphragm in carburetor. Keeps RPM levels even when filter begins to clog.
• DECOMPRESSION VALVE: Makes starting easier.
• EASY2START™ SYSTEM: Reduces the strength and effort needed to start the engine. Available on select models.
• STIHL QUICKSTOP® PLUS (Q) - AN ADDITIONAL CHAIN BRAKING FEATURE: Designed to activate when you completely release the rear handle. Designed to stop the chain within one second.
• PURGE PUMP PRIMER: Lets you prime the carburetor without flooding it. Standard on select models.
• STIHL M-TRONIC™: Electronically optimizes the fuel mixture over the whole RPM — ensuring top performance and efficiency under varying conditions.
• ELASTOSTART™ HANDLE: Has built-in shock absorber for smoother starting.
• QUICK CHAIN ADJUSTER: A toolless chain adjuster.
• CAPTURED GUIDE BAR NUTS: Secure the guide bar and sprocket cover.